Parts Roundup – CT Engineering

CT Engineering I believe has only been around for about an year but its company basically comprises of old Comptech USA employees. Those who were sad to see Comptech shut down should be happy to know that their parts live on through CT Engineering. For the Acura TSX owner, CT Engineering has quite a few parts avaialble for the first gen 04-08 models.

Stainless Steel Header – (210-060)

  • 4-2-1 header
  • Stainless Steel
  • TIG welded
  • 50 state legal
  • Application: 04-08 Acura TSX
  • Installation time: 1.5 hours +/-


Stainless Cat-Back Exhaust – (230-050)

  • 304 Stainless-Steel Dual-Muffler Cat-Back
  • Smooth, Low, and deep tone
  • Polished Stainless-Steel mufflers
  • 3.5″ Polished Stainless-Steel Resonated tips
  • Application: 04-07 Acura TSX
  • Installation time: 1 hour +/-

Rear Sway Bar – (140-145)

  • Rear Sport Sway-Bar replacement
  • Diameter increased from 15mm (stock) to 22mm
  • Helps reduce understeer and improves cornering response
  • Manufactured from 6150 steel with a silver powdercoat finish
  • Includes bushings, brackets and instructions
  • Reuses factory End-Links
  • Application: 04-08 Acura TSX
  • Installation time: 1.5 Hours +/-

Rear Camber Adjuster – (160-068)

  • Camber adjuster-rear (-1.5 to +3 deg.)
  • Uses a rubber bushing
  • SOLD INDIVIDUALLY (One kit per wheel)
  • Application: 04-07 Acura TSX
  • Installation time: 1/2 hour +/-

Icebox Cold Air Intake – (330-155)

  • IceBox Cold Air Intake
  • High volume lid with internal velocity stack
  • Increases airflow to engine
  • Lower air horn draws cooler air from behind the bumper and eliminates
    restriction of standard inlet
  • Includes High flow reusable foam filter element
  • All necessary hardware included
  • Application: 04-08 Acura TSX
  • Installation time: 2 Hours +/-

CT Engineering Supercharger Kit – (see website for multiple apps)

  • Adds approximately 50 Horsepower and 30 lb/ft. of Torque at the wheels
  • Torque band is widened to between 3,000 and 7,000 RPM
  • Very linear increase in boost as RPMs increase
  • Impressive mid-range throttle response and top-end performance
  • Completely “bolt-on” kit requires no engine modifications
  • Includes tool to modify factory Fuel Pressure Regulator (located in the fuel tank) to the exact pressure required by the Supercharger, and a new Intake Tube to connect either the stock air intake or CT Engineering Cold Air Intake Kit
  • Utilizes the Eaton M62 blower, making approximately 5psi of boost
  • Tuning is handled by both the CT Engineering ACM (Advanced Control Module) and by a Re-Flash of the stock ECU.
  • ACM comes with complete wiring harness. No cutting or splicing of wires is required
  • VTEC is lowered to 3,000 RPM from 6,000, and Camshaft Angle is advanced to 20 degrees between 2,000 to 7,000 RPM only under boost conditions
  • Requires customer to send in ECU, Immobilizer Module, and Keys
  • 50 State Street Legal, and CARB Certified for street use in California
  • Installation time: 7 hours +/-
  • Shipping dimensions: 30 X 18 X 13 (inches) (56 lbs.) (www.ups.com)
  • Further Performance Gains can be realized by adding CT Engineering Cold Air Intake Kit, CT Engineering Header, and CT Engineering Cat-Back Exhaust System
  • Other model year TSX kits are under development. Please stay tuned to the New Products Page for updates

For you 04-08 Acura TSX owners, CT Engineering has you covered on almost all fronts, Performance and suspension. For more informaion visit the CT Engineering site here.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s